AceBound UVR+ 7.5kg

All Prices include V.A.T.

AceBound UVR+ 7.5kg

£76.20£3,599.40 inc. V.A.T

AceBound UVR+ is an aliphatic UV stable, 2-part polyurethan binder. Specially designed to be used for resin bound driveways, pathways, and patios. The optimum ratio of component parts has been developed to create a high strength, durable binder suitable for domestic and commercial resin bound use.

  • UV stable
  • SUDS Compliant (porous)
  • No catalyst required
  • Low maintenance
  • Durable & flexible
  • Manufactured to ISO 9001: 2015 & ISO 14001: 2015
  • Low VOC
SKU: N/A Category:

AceBound UVR+ is suitable to be used with 3, 6 and 10mm aggregate.
We recommend using AceBound UVR+ with 106.25kg aggregate and sand to create your
resin bound surface. It is available to purchase as a kit with ACE aggregate blends. Please
refer to Full Kits to find out more.

Pre-catalysed formula which is adapted to seasonal changes.

Coverage Rate: 4m2 @15mm and 3.3m2 @18mm. Note this can vary depending on the aggregate used.
Suitable for use in temperatures 5C to 30C

This product is available as a DIY kit and comes with all the materials you need to complete
your resin bound project. Please refer to our Resin Bound DIY Kits to find out more.

Additional information

Weight N/A

Single (Part A & B), Bulk 50 Units

Committed to delivering 'best in class' quality

Ronacrete Approved Contractor
SureSet Approved Logo

Product FAQ's

What’s the difference between a resin bound driveway and a resin bonded driveway?

Resin Bound
Resin bound is an eco-friendly, highly porous paving solution for ground surfacing. It is a choice of decorative aggregates mixed with specialist resins then hand trowelled to give a flat smooth surface suitable for driveways, paths and patios.

Resin Bonded
Resin bond is laid in a different manner to resin bound materials. It involves applying a layer of resin to the existing surface, which aggregates are then scattered in to the top of. This gives a non-porous surface, which has a coarser finish and leaves a certain amount of loose stone on the final surface.

How long will a resin bound driveway last?

A resin bound driveway is a strong and durable surface, that is resistant to weather conditions. Comparable products like Tarmac or Asphalt can soften in the summer heat and freeze in cold of winter, they will also be damaged by UV light. Resin is much more stable than these alternatives performing well year round in some of the UK’s worst weather. Our driveways come with a 10 year guarantee and can last to a good standard for 25+ years.

Can I lay a resin driveway over my existing driveway?

This depends on the type and condition of your existing driveway. However, it should be laid on an appropriate sub-base of either asphalt or concrete. 

Do I need planning permission for a resin driveway?

If you have an existing driveway then planning permission will not be required. For any newly installed driveways or extensions planning permission is required for surfaces such as traditional block paving, flags and tarmac.