DIY Rubber Safety Kit

All Prices include V.A.T & Free UK Delivery

DIY Rubber Safety Kit

£42.30£70.50 inc. V.A.T

The kit will contain all the materials you need to lay 1m2 of rubber safety surface at our recommended depth of 15mm. The kit is cleverly designed, utilizing the largest bucket to mix the resin and rubber together using a drill and paddle.

Clear
SKU: 12346 Categories: ,

The kit will contain all the materials you need to lay 1m2 of rubber safety surface at our recommended depth of 15mm. The kit is cleverly designed, utilizing the largest bucket to mix the resin and rubber together using a drill and paddle.

Contents: 12.5kg rubber granules, 2.5kg of resin

  • Perfect to be laid as a soft area for leisure, sport or play
  • Absorbs impact with its elasticity
  • Minimal maintenance
  • Long lasting
  • 5 colour options!

 

The kit is designed to be laid onto a hard surface, such as concrete, tarmac or paving at a depth of 15mm using a steel trowel. Please refer to our “Base Rubber DIY Kit” if you are creating your own sub-base and laying straight onto type 1.

Full Heights: The manufacturer’s recommended fall heights are listed below. If you are choosing the DIY Rubber Safety Kit for under play equipment please follow the guidance to lay at the appropriate depths.

Depth of RubberPotential Fall Heights
40mm1.2 meters
50mm1.5 meters
80mm2.0 meters

 

Brand Ace Resin
Size12.5kg Rubber and 2.5kg Resin
Manufactured inUnited Kingdom
Minimum Application Temperate5°C
Maximum Application Temperature30°C
Existing Suitable BasesConcrete, Tarmac or Paving Slabs
Recommended Depth 15mm
Curing Time Guide 24-72 Hours Full Cure
Suitable Resin Binder Ace Resin 2.5kg
Coverage1m2 @15mm Depth

Additional information

Weight15.5 kg
Dimensions317 × 415 cm
Colour

Blue, Red, Green, Yellow, Black

Reviews

There are no reviews yet.

Be the first to review “DIY Rubber Safety Kit”

Your email address will not be published. Required fields are marked *

Working in Partnership With

Ronacrete Approved Contractor

Product FAQ's

What’s the difference between a resin bound driveway and a resin bonded driveway?

Resin Bound
Resin bound is an eco-friendly, highly porous paving solution for ground surfacing. It is a choice of decorative aggregates mixed with specialist resins then hand trowelled to give a flat smooth surface suitable for driveways, paths and patios.

Resin Bonded
Resin bond is laid in a different manner to resin bound materials. It involves applying a layer of resin to the existing surface, which aggregates are then scattered in to the top of. This gives a non-porous surface, which has a coarser finish and leaves a certain amount of loose stone on the final surface.

How long will a resin bound driveway last?

A resin bound driveway is a strong and durable surface, that is resistant to weather conditions. Comparable products like Tarmac or Asphalt can soften in the summer heat and freeze in cold of winter, they will also be damaged by UV light. Resin is much more stable than these alternatives performing well year round in some of the UK’s worst weather. Our driveways come with a 10 year guarantee and can last to a good standard for 25+ years.

Can I lay a resin driveway over my existing driveway?

This depends on the type and condition of your existing driveway. However, it should be laid on an appropriate sub-base of either asphalt or concrete. 

Do I need planning permission for a resin driveway?

If you have an existing driveway then planning permission will not be required. For any newly installed driveways or extensions planning permission is required for surfaces such as traditional block paving, flags and tarmac. 

Questions?